Broadband Vs. Gigabit Routers for a Computer

The main difference between a regular broadband router and a gigabit router is the capacity that each offers for transferring data to and from computers in a local or wide-area network. Broadband routers are ideal for providing computers with access to the Internet, while gigabit routers are better suited for transferring large files between computers that are connected to a LAN.

A gigabit router typically complies with the 802.11n Wi-Fi standard which is capable of transferring data at up to 600 megabits per second. A broadband router usually features the 802.11a, 802.11b or 802.11g Wi-Fi protocols, which transfer data at up to 54 Mbps. That the routers transfer data at these rates does not mean your computer will be able to process the data at these rates, especially if your machine is an older model or has a slow processor.

Speeds

The main difference between a regular broadband router and a gigabit router is the capacity that each offers for transferring data to and from computers in a local or wide-area network. Broadband routers are ideal for providing computers with access to the Internet, while gigabit routers are better suited for transferring large files between computers that are connected to a LAN.

Internet

When it comes to accessing the Internet, there’s not much difference between a gigabit and normal broadband router. The type of Internet connection you have ultimately determines the rate at which your router receives data from the Web. At the time of publication, cable and DSL Internet connections are the most common types of high-speed links available. DSL connections transfer data from the Internet at up to 15 Mbps, while cable connections can reach speeds of up to 150 Mbps. A gigabit router is best for accessing the Web through the fastest cable connection available, which, at the time of publication, is Verizon’s FiOS service.

Bandwidth

Gigabit and normal broadband routers can provide multiple computing devices with simultaneous access to your LAN and WLAN. Because a gigabit router has a wider bandwidth than a normal broadband router, it is able to support more devices at once. Devices that access a gigabit router experience fewer data transfer slowdowns than those connected to a broadband router. When serving as a platform for transferring data between parallel computers, a gigabit router is more efficient at maintaining the infrastructure needed to support large-file transfers.

Considerations

As with any technology, faster and stronger devices — such as a gigabit router — are pricier alternatives to their low-end counterparts, like a normal broadband router. Gigabit routers are also more powerful than normal broadband routers and, as a result, are capable of providing stronger links to connected devices. For instance, a broadband router loses speed when it is further from a connected device. A gigabit router maintains its speed capacity for longer distances than a broadband router.

How to Remove DD-WRT on Netgear

The DD-WRT router firmware may not be for everyone. If you’ve installed DD-WRT on your Netgear router and you want to revert back to the stock Netgear firmware you can use the firmware upgrade section of the DD-WRT interface to upload and flash the firmware file from Netgear. Netgear keeps a stock of all its router firmware online in a knowledge base so you can download the appropriate version for your router.

  • Download the Netgear firmware to your computer. Browse to the Netgear Router Support site and type in the model number of your router. You can find the model number on a sticker on the bottom of the router or on the back under the Ethernet ports, if it’s a stand-up model. Type in the model number and press “Enter” to search for it. Locate the most recent firmware for your router and download the file to your computer.
  • Connect your computer directly to the Netgear router with an Ethernet cable. Log in to the router by typing in the Internet Protocol address of the router. The default IP address is “192.168.1.1” and the default username and password are “root” and “admin.”
  • Click on the “Administration” tab and then click on the “Firmware Upgrades” sub-tab. Click on the “Choose File” button and browse to the location of the downloaded firmware file. Double-click the file and then click “Upgrade.” Wait for the upgrade process to complete and for the router to reboot.
  • Reset the router by inserting a paper-clip into the reset button hole on the back of the router and holding it down for 30 seconds. Remove the power cord while continuing to hold the reset button. Wait another 30 seconds. Reconnect the power cord and continue holding the reset button for an additional 30 seconds. Release the reset button and wait for the router to fully reset.
  • Set up your Netgear router’s firmware by logging in through your browser at routerlogin.net or routerlogin.com. The default username and password are “admin” and “password.”

Tips & Warnings

  •  Flashing your router with DD-WRT can irrevocably damage it to the point where it cannot be repaired. If the damage has been done, you may not be able to flash back to your old firmware

How to Set the MTU to Auto in Comcast

The DD-WRT router firmware may not be for everyone. If you’ve installed DD-WRT on your Netgear router and you want to revert back to the stock Netgear firmware you can use the firmware upgrade section of the DD-WRT interface to upload and flash the firmware file from Netgear. Netgear keeps a stock of all its router firmware online in a knowledge base so you can download the appropriate version for your router.

  • Download the Netgear firmware to your computer. Browse to the Netgear Router Support site and type in the model number of your router. You can find the model number on a sticker on the bottom of the router or on the back under the Ethernet ports, if it’s a stand-up model. Type in the model number and press “Enter” to search for it. Locate the most recent firmware for your router and download the file to your computer.
  • Connect your computer directly to the Netgear router with an Ethernet cable. Log in to the router by typing in the Internet Protocol address of the router. The default IP address is “192.168.1.1” and the default username and password are “root” and “admin.”
  • Click on the “Administration” tab and then click on the “Firmware Upgrades” sub-tab. Click on the “Choose File” button and browse to the location of the downloaded firmware file. Double-click the file and then click “Upgrade.” Wait for the upgrade process to complete and for the router to reboot.
  • Reset the router by inserting a paper-clip into the reset button hole on the back of the router and holding it down for 30 seconds. Remove the power cord while continuing to hold the reset button. Wait another 30 seconds. Reconnect the power cord and continue holding the reset button for an additional 30 seconds. Release the reset button and wait for the router to fully reset.
  • Set up your Netgear router’s firmware by logging in through your browser at routerlogin.net or routerlogin.com. The default username and password are “admin” and “password.”

Tips & Warnings

 Flashing your router with DD-WRT can irrevocably damage it to the point where it cannot be repaired. If the damage has been done, you may not be able to flash back to your old firmware.

How to Use the Preset Wireless Security Details – Netgear Routerlogin Net

Preset Wireless Security in Netgear Router manages the security of your wifi network. Using these details, you can connect to the Internet to access Netgear Routerlogin Net. The preset wireless security details come with wifi router. These details are mostly available on the label of your router or sometimes it can be found in the booklet providing guidelines to connect to the router. There is no risk of viral of this password as every router has unique detail which no stranger can use. To use these preset wireless settings, you can follow the below method.

Configure Router and Modem

Configure your Modem to the Router using an Ethernet Cable.  When both are connected, power on the modem and Router. Look their LED, when you find the LED lights are stable not blinking anymore, it means the connection has been done properly.

Find the Preset Wireless Security Details

Take the Preset Wireless Security SSID Name and Password from your Router label.  You can note down this as it will be used to connect your device to the wifi network.

Manual and WPS Connectivity

In order to connect your device to your Router, you can prefer either Manual or WPS method.  If you opt for the manually, then check the software manages the wifi networks. It will show the SSID name of your router. When you click on this, it will ask for the security key that is also given on the label of your router.

Use of WPS method depends on your device, if your device supports the WPS method, you can connect using WPS method. To use this method, you need to press the WPS button on your Router and then immediately press the WPS method on your device.

Both devices will get connected even you will not need to use any preset security detail.  Remember, WPS method does not support the WEP supporting devices.

Netgear Routerlogin Net

Using either WPS or Manual method, you will be connected to the wifi and now you can browse the www.routerlogin.net on your device. Confirm the Netgear Router Password. If it is your first time to access Routerlogin then you can use the ‘admin’ in lower case for both username and password as this is same by default to every router. If you changed the password and now forget the password then reset your Router. For this press the Reset button located on the backside of your Router.

Change Preset Wireless Security SSID and Password

After entering the accurate password, you will reach to the web interface of your router. It is the home page of routerlogin.net where you can change the preset wireless security   as:

Click on Wireless Settings > Change the SSID Name > Select WPA2-PSK (AES), the passphrase option will appear after selecting this option. Change the passphrase (This is your Password) > Save the settings.

Thus, all your settings will be saved. Similarly, you have a number of features available to the left panel. These features allow you to manage your router settings. Whenever you get Netgear Routerlogin Net remember to upgrade the firmware to use your router flawlessly

Forget Netgear Router Password Of R6700 – What To Do?

When you forget the Netgear Router Password of R6700, you have to reset your Router Router. The main purpose to reset your router is, it removes every customized setting including the password. Thus when you reset your router, it will take you to the default factory settings. From here, you can take a turn to access Netgear Setup and Routerlogin.net using the default Netgear Router Login details.

Routerlogin Reset Router:

Every Router has manufactured the Reset Button to its backside. The fact is that the button is small in size that’s why it rarely comes to your notice. But even being a small button, it is useful. What you need to do is:

Press the Reset button on your Router.  It can be pressed using the sharp object such as the tip of the pen.

Long press this button for almost 10 seconds and then instantly leave it.

This will result to remove the entire settings even delete the changed password whatever you gave your router.

Now, when you restart the Netgear Router R6700, it will be like you recently bought it.  So, your router is back with the Default settings. You need to follow the Netgear Setup instruction for your R6700 Router.

Following the Default Netgear Router Password:

  • Username: admin (small letter)
  • Password: password (small letter)

You can access routerlogin.net admin page to change the username and password of your router.

The R6700 routers are effectively growing in the market for its Smart Dual-Band Wi-Fi. 1300 Mbps speed and high power external antennas which result to provide high internet speed for both 2.4 and 5GHz devices. So, definitely, you should give attention to its security. It means to change the default password. Along with modifying the changes, you should never forget to click on Apply to save the change. Especially, when it is a matter of making changes in the default Netgear Router Password then you should save the changed password or write it on the paper and keep the paper secure.